Views: 0 Author: Site Editor Publish Time: 2021-06-02 Origin: Site
Aluminum PCB substrate is a kind of metal base copper clad plate with good heat dissipation function. Generally, a single panel is composed of three layers of structure, namely the circuit layer (copper foil), the insulation layer and the metal base layer. Commonly seen in LED lighting products. There are two sides, the white side is welding LED pin, the other side is aluminum color, generally smear heat conduction slurry and contact with the heat conduction part. There are ceramic substrates and so on. However, aluminum PCB is replacing the ceramic substrate to open up an irreplaceable broad market. The metal base is the supporting member of the aluminum substrate, which requires high thermal conductivity. No radiator, greatly reduced volume, excellent heat dissipation effect, good insulation and mechanical properties. Aluminum printed circuit boards are metal-based, copper-clad laminates with a good heat dissipation function. Generally, a single Aluminum PCB is composed of a three-layer structure: a circuit layer (copper foil), an insulating layer, and a metal base layer. Let's return to today's focus:Choosing our aluminum PCB is a win-win.
Aluminum PCB consists of a dielectric metal base with a bonded copper circuit layer to create superior heat transfer to help cool components while eliminating problems associated with managing fragile ceramics.
We provide a wide range of electrical and thermally conductive interface pads, thermally conductive gap fillers, thermal phase change materials and thermally conductive electrically insulating materials, as well as specialized equipment for high volume manufacturing.
PCB Aluminum-backed PCBs can consistently increase the durability and long-term reliability of a final product through temperature control and associated reductions in failure rates.
1.Our manufactures aluminum printed circuit boards (PCB) with a full selection of high performance and low-cost materials from leading suppliers around the world. Aluminum PCB consists of a dielectric metal base with a bonded copper circuit layer to create superior heat transfer to help cool components while eliminating problems associated with managing fragile ceramics. As we all know, heat transfer plays a key role in helping to cool the components while eliminating problems associated with managing fragile ceramics.
2.Our works to be the best aluminum PCB manufacturer when it comes to exceeding all customer expectations. We provide a wide range of electrical and thermally conductive interface pads, thermally conductive gap fillers, thermal phase change materials and thermally conductive electrically insulating materials, as well as specialized equipment for high volume manufacturing.
3.Aluminum-backed PCBs can consistently increase the durability and long-term reliability of a final product through temperature control and associated reductions in failure rates. Aluminum designs also deliver better mechanical stability and lower thermal expansion levels than other available materials.
After a long time of development, our Aluminum PCBs are proved good and low price can have it all, with the strength of good reputation and the wide market is our shining trophy. We can say without exaggeration, choosing our aluminum PCB is a win-win. In general, we have a wide and good reputation for the use, quality and cost-performance of our products. Our company group is committed to providing customers with the best products and the best value, and build the best trust with customers to meet every specific need!
Boyunfa is a printed circuit board company, Located in Shenzhen,520 employees,16000 square feet, Who have offered PCB Manufacturing Service for more than 10 years.With the state-of-the-art technologies we employ, along with our highly trained workforce we are able to ensure that every PCB we provide matches your design requirements.